Call Now to Save! 1-800-523-3353

Dragster & Altered Roll Cages


USE FOR JR DRAGSTERS ONLY !, INCLUDES (2) 3/4" DIA X 0.058 WALL CHROME MOLY TUBES, TUBES HAVE (1) 90 DEG BEND, w/8" LEG & 19" LEGCUTTING, FITTING & WELDING REQ'D
Our Price: $38.95
Ask a Question
DRAGSTER 6PT ROLL BAR KIT, 1 5/8XO83CM, INCLUDES AERO TUBE BRACE & HELMET TUBE KIT 05-066, INSIDE MEASUREMENTS: 20 1/4" WIDE AT BOTTOM 14 1/4" WIDE TOP
Our Price: $254.95
Ask a Question
DRAGSTER 6PT WIDE ROLL BAR KIT, 1 5/8XO83CM, INCLUDES AERO TUBE BRACE & HELMET TUBE KIT 05-066, INSIDE MEASUREMENTS: 22" WIDE AT BOTTOM 15 3/4" WIDE TOP
Our Price: $254.95
Ask a Question
DRAGSTER SHOULDER HOOP, 2-PIECE, (2) PIECES 1-1/2"X065CHROME MOLY WITH SPLICE TUBEONE END BORED FOR SLIP JOINT WITH 1-3/8" TUBEMAX WIDTH 24"!!! NOT FOR ADVANCED ET !!!INTERNAL SLEEVES REQUIRED FOR ADVANCED ET, 05-063-S
Our Price: $160.95
Ask a Question
SLEEVE - ADVANCED ET DRAGSTER SHOULDER HOOP, REQUIRED WHEN USING 05-063 SHOULDER HOOP FOR ADVANCED ET(2) SLEEVES 12" LONG TO FIT INSIDE 1 1/2 X 0.065 CHROME MOLY TUBESHOP NOTE; 1 3/8 X 083 X 12" TURNED DOWN, TAPER BOTH ENDS
Our Price: $55.95
Ask a Question
HELMET TUBE KIT - CHROME MOLY, FOR USE WITH DRAGSTER & F/C TYPE ROLL CAGES CAN BE USED IN DOOR CARS WITH CHROME MOLY FUNNYCAR CAGE CONVERSIONS, INCLUDES (2) 1"X0.058 WALL CHROME MOLY TUBESTUBES HAVE (1) 90 DEG BEND WITH 10" LEG & 19 3/4" LEGMUST BE TIG WELDED
Our Price: $51.95
Ask a Question
1-1/2"DIAMETER X 0.058 WALL CHROME MOLY, 1-PIECE WITH 2 BENDSFOR CHASSIS WITH ROLL CAGE LESS THAN 18" TALL21" WIDE AT BENDS, 30" LONGCUSTOMER REQUIRED TO MAKE 45 DEGREE CUTS AT ENDS
Our Price: $110.95
Ask a Question
1 1/2"DIAMETER X 0.058 WALL CHROME MOLY, 1-PIECE WITH 2 BENDSFOR CHASSIS WITH ROLL CAGES LESS THAN 18" TALL.23" WIDE INSIDE AT BENDS, 30" LONGCUSTOMER REQUIRED TO MAKE 45 DEGREE CUTS AT ENDS
Our Price: $110.95
Ask a Question
1-5/8" x 0.083 WALL CHROME MOLY, INCLUDES AERO TUBE BRACE & HELMET TUBE KIT 05-066
Our Price: $254.95
Ask a Question
1-Pc SHOULDER HOOP & COCKPIT TOP FRAME RAIL1-1/2" X 0.065 WALL CHROME MOLY20" WD INSIDE, 76" LG61-3/4"BACK OF SHLD HOOP TO 16 DEGREE BEND AT FRONT!! 7.50 SEC ET AND SLOWER !!FOR ADVANCED ET (7.49 & QUICKER) USE F/C SHLD HOOP 06-067
Our Price: $138.95
Ask a Question
FUNNY CAR 6-POINT ROLL BAR KIT 1-5/8" X 0.083 WALL CHROME MOLYINCLUDES AREO TUBE BRACE & HELMET TUBE KIT 05-066
Our Price: $254.95
Ask a Question
3-Pc SHOULDER HOOP & COCKPIT TOP FRAME RAIL WITH SPLICE SLEEVES1-1/2" X 0.065 WALL CHROME MOLY, SHOULDER HOOP 20" WD INSIDE X 29" LONG, TOP RAILS 47" LG w/16 DEG BEND 9-5/8" FROM END
Our Price: $193.95
Ask a Question
6-POINT DRAGSTER / ALTERED FUNNY CAR CAGE TO CUSTOMER SPECS.
Our Price: $314.95
Ask a Question

Positive SSL on a transparent background