Call Now to Save! 1-800-523-3353

Dragster, Altered, Funny Car & Roadster Chassis Kits


225" WHEEL BASE, 21" SHOULDER HOOP, ALL TUBING IS CHROMEMOLY, NOTCHED & BENT, INCLUDED STRANGE ALUMINUM REAR & MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE & FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.30 - 7.49 SECONDS
Our Price: $2,754.00
Ask a Question
ADVANCED ET DRAGSTER KIT - SOLID MOUNT REAR, 23" WIDE, 225" WHEEL BASE, 23" SHOULDER HOOPALL TUBING IS CHROME MOLY, NOTCHED & BENT, INCLUDES 9" FORD REAR HOUSING with OLDS ENDS & MOUNTING PLATES, A-ARM FRONT END with KING PIN BOSSES, FULL MID MOTOR PLATE & FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.30 - 7.49 SECONDS
Our Price: $2,370.00
Ask a Question
225" WHEEL BASE, 23" SHOULDER HOOP, ALL TUBING IS CHROME MOLY, NOTCHED & BENT, INCLUDED STRANGE ALUMINUM REAR & MOUNTING PLATES, A-ARM FRONT END WITH KING PIN BOSSES, FULL MID MOTOR PLATE & FRONT MOTOR MOUNT PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.30 - 7.49 SECONDS
Our Price: $2,754.00
Ask a Question
Now available to the serious, do-it-yourself chassis builder, is a complete line of drag race chassis kits.  Each chassis kit incorporates the championship quality and engineering excellence found in every S&W race car built "in house".   Every S&W race chassis combines the knowledge gained through over forty years of on-track testing & race ...
Our Price: $4,595.00
Ask a Question
Now available to the serious, do-it-yourself chassis builder, is a complete line of drag race chassis kits.  Each chassis kit incorporates the championship quality and engineering excellence found in every S&W race car built "in house".   Every S&W race chassis combines the knowledge gained through over forty years of on-track testing & race ...
Our Price: $4,595.00
Ask a Question
ADVANCED ET, MEETS SFI SPEC 2.5 W/ROLL CAGE OVER 18", INCLUDES; DOMEX FAB REAR HOUSING w/OLDS ENDS & MOUNTING BRACKETS, SPINDLE BOSSES, 1/4" ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MTR MNT BLANKES with SADDLES, CHASSIS PL's FOR MNTG REAR, PARACHUTE / ANTIROTATION MOUNTINGBRACKETS & BLUE PRINT SET CHROMEMOLY TUBING; CUT, BENT & ...
Our Price: $3,375.00
Ask a Question
ADVANCED ET, MEETS SFI SPEC 2.5 W/ROLL CAGE OVER 18", INCLUDES; STRANGE ALUMINUM REAR HOUSING with MNTG BRACKETS,, SPINDLE BOSSES, 1/4" ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTIROTATION MOUNTING BRACKETS & BLUE PRINT SET, CHROMEMOLY TUBING; CUT, BENT & ...
Our Price: $3,140.00
Ask a Question
ADVANCED ET, MEETS SFI SPEC 2.5 W/ROLL CAGE OVER 18"!!! REAR HOUSING NOT INCLUDED !!!KIT INCLUDES; SPINDLE BOSSES, 1/4" ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MTR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTIROTATION MOUNTING BRACKETS & BLUE PRINT SET, CHROMEMOLY TUBING; CUT, BENT & NOTCHED23" ...
Our Price: $2,370.00
Ask a Question
ADVANCED ET, MEETS SFI SPEC 2.5 W/ROLL CAGE OVER 18", INCLUDES; DOMEX FAB REAR HOUSING w/OLDS ENDS & MOUNTING BRACKETS, SPINDLE BOSSES, 1/4" ALUMINUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MTR MNT BLANKES with SADDLES, CHASSIS PL's FOR MNTG REAR, PARACHUTE / ANTIROTATION MOUNTINGBRACKETS & BLUE PRINT SET CHROMEMOLY TUBING; CUT, BENT & ...
Our Price: $3,375.00
Ask a Question
ADVANCED ET, MEETS SFI SPEC 2.5 W/ROLL CAGE OVER 18", INCLUDES; STRANGE ALUMINUM REAR HOUSING with MNTG BRACKETS,, SPINDLE BOSSES, 1/4" ALUM FULL MID PLATE WITH CHEVY BOLT PATTERN, FRONT MOTOR MOUNT BLANKS with SADDLES, CHASSIS PLATES FOR MOUNTING REAR, PARACHUTE / ANTIROTATION MOUNTING BRACKETS & BLUE PRINT SET, CHROMEMOLY TUBING; CUT, BENT & ...
Our Price: $3,140.00
Ask a Question
200" wheelbase, front engine dragster chassis kit.  Perfect for nostalgia dragster racing.  Meets SFI spec 2.4B. Kit includes all chrome moly tubing, cut, bent and notched (where possible).  Jig welded front axle, 1/4" Aluminum mid motor plate blank. Aluminum front motor plate blanks.   9" Ford rear with Olds ends.  Rear housing mounts. ...
Our Price: $2,395.00
Ask a Question
CONVERTS 225" SOLID CHASSIS TO 235" SWING ARM CHASSISREAR CLIP & SWING ARM ARE JIG ASSEMBLED & WELDEDSPLICED TO TOP & BOTTOM RAILS BEHIND MID-PLATE, UPPER LINK PACKAGE WITH (8) CHROME MOLY ROD ENDS, TORSION BAR & LINKS, STRANGE ENGINEERING ALUMINUM 4-LINK HOUSING, PARACHUTE MOUNT, MOLY BRACKETS & ADJUSTABLE LOWER SHOCK MOUNTS.  CUTTING AND WELDING ...
Our Price: $2,495.00
Ask a Question
All chrome-moly cut, bent & notched. Hemi motor plate. Motor plate mounting brackets.  Rear housing mounts.  Funny Car blue print ?
Our Price: $2,929.00
Ask a Question
Meets SFI spec 10-2 for altereds 6.00 to 749 E.T. All chrome-moly cut & bent. Jig welded front axle. Strange aluminum rear housing with chrome moly brackets .  Rear housing mounts. Water jet cut Chevy mid plate.  Water jet cut Chevy front motor plate blanks. Motor plate mounting brackets . Jig welded swing arm & upper tubes with 8 chrome moly rod ...
Our Price: $4,395.00
Ask a Question
67-68 Camaro roadster chassis kit,  112" WB, Designed FOR CYNERGY 67 CAMARO ROADSTER BODYAll CHROME MOLY TUBING CUT, BENT & NOTCHED, STRANGE ALUM REAR HOUSINGJIG WELDED SWING ARM, UPPER LINKS, MOLY ROD ENDS & HARDWAREJIG WELDED REAR HSG BRACKET, REAR SUSPENSION FRAME MOUNTSANTI ROLL BAR & HARDWARE, FRONT & MID PLATES FOR BIG BLOCK CHEVY, BOLT IN ...
Our Price: $4,595.00
Ask a Question
225" WHEEL BASE, 23" SHOULDER HOOP, ALL TUBING IS CHROMEMOLY, NOTCHED & BENT, INCLUDES 9" FORD REAR HOUSING w/OLDS ENDS & MOUNTING PLATES, A-ARM FRONT END W/KING PIN BOSSES, FULL MID MOTOR PLATE & FRONT MOTOR PLATES FOR BIG BLOCK CHEVY, MEETS SFI SPEC 2.5 FOR 6.30 - 7.49 SECONDS
Our Price: $2,370.00
Ask a Question

Positive SSL on a transparent background